Filter
Top Products
45
Note: It is possible that certain computers may have difficulty communicating at a
sustained 115kbaud rate, which may result in communication errors during firmware
downloading. If this occurs, try setting the “baud rate” parameter shown in Figure 19
to a lower value.
Figure 19: Communications Options Window
Next, select the “Setup…Boot Strap Loaders” menu item. The “Choose Loaders”
window shown in Figure 20 then appears. Confirm that the correct paths to the
COLDLOAD.BIN and PILOT.BIN files are entered. Enter the correct paths if
necessary.
Figure 20: Boot Strap Loaders Window