Filter
Top Products
121
Mobile Computing
Monitoring battery power
Determining remaining battery power
Wait a few moments after turning on the computer before trying to
monitor the remaining battery power. The computer needs this time
to check the battery’s remaining capacity and perform its
calculations.
Move the pointer over the power icon in the notification area, see
“Finding your way around the desktop” on page 134 for more
information on the notification area. A pop-up message displays the
remaining battery power as a percentage.
With repeated discharges and recharges, the battery’s capacity
gradually decreases. A frequently used older battery does not power
the computer for as long as a new battery, even when both are fully
charged.
TECHNICAL NOTE: The computer drains the battery faster at low
temperatures. Check your remaining charge frequently if you are
working in temperatures below 50 degrees Fahrenheit.
The computer calculates the remaining battery charge based on your
current rate of power use and other factors such as the age of the
battery.
What to do when the battery runs low
When the battery runs low you can:
❖ Plug the computer into an external power source and recharge
the battery
❖ Place the computer into Hibernation mode and replace the
battery with a charged spare (not included with your computer)
❖ Save your work and turn off the computer
If you do not manage to do any of these things before the battery
completely runs out of power, the computer automatically enters
Hibernation mode and turns itself off. Hibernation mode keeps
track of where you were, so that when you turn on the power again,
you can continue where you left off.
If you have Hibernation mode enabled (the default), the computer
copies the details of your open programs and files to the internal
storage drive before shutting down. For more information on using
Hibernation, see “Hibernation mode” on page 89.
NOTE