Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 13 -
If you are visiting the Router from the main computer, please select Yes, and then click
Next.
If you are visiting the Router from another computer rather than the main computer,
please select No, and then click Next.
Note:
1. It’s strongly recommended that you visit and configure the Router from the main
computer.
2. To find the main computer’s MAC, please go to Start > Run on your main computer, type
in cmd and press Enter. At the command prompt, enter ipconfig/all and press Enter.
The MAC will be displayed as Physical Address.
2) If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-7. Configure the following parameters and then click Next to continue.
Figure 3-7 Quick Setup - Static IP