TP-Link d9 Network Router User Manual


 
Arche r D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
1.3.2 The Back Panel
Figure 1-2
The following parts are located on the rear panel (View from left to right).
AD SL: Through the port, you can connect the telephone to the modem router. Or you can
connect them by an external separate splitter. For details, please refer to
2.3 Connecting the
Modem Router.
WPS: The switch for the WPS function. For details, please refer to 4.8.2 WPS Settings.
WiFi ON/OFF: The switch for the WiFi function. Press it to enable/disable the WiFi function.
USB 3.0: The USB 3.0 port connects to a USB 3.0 storage device or a USB 3.0 printer.
LAN1, LAN2, LAN3, LAN4/WAN : Through these ports, you can connect the modem router to
your PC or other Ethernet network devices. In wireless router mode you will be able to
connect to Cable/FTTH/VDSL/ADSL devices.
POWER ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
Antennas: Used for wireless operation and data transmit.
The following parts are located on the side panel (View from top to bottom).
USB 2.0: The USB 2.0 port connects to a USB 2.0 storage device or a USB 2.0 printer.
RESET: There are two ways to reset the modem router's factory defaults.
6