Filter
Top Products
Arche r D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
static route.
Subnet Mask: It determines which portion of an IP Address is the network portion, and
which portion is the host portion.
Gateway: Type in the correct gateway address for the static route.
Interface: Select the Interface from the drop-down list.
Status: Select Enabled or Disabled from the drop-down list.
3. Click Save to save your settings as shown in Figure 4-68.
To modify or delete an existing entry:
1 Find the desired entry in the table.
2 Click Edit as desired on the Edit column.
Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete the selected entries.
4.12.3 RIP Settings
Choose “Route Settings”“RIP Settings”, you can see the RIP (Routing Information Protocol)
screen which allows you to configure the RIP.
Figure 4-69
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
4.13 IPv6 Route Settings
Choose “IPv 6 Route Se ttings”, it includes two menus: IPv6 Default Gateway and IPv6 Static
Route. The detailed descriptions are provided below.
4.13.1 IPv6 Default Gateway
Choose “IPv 6 Route Se ttings”“IPv 6 Default Gateway”, you can see the Default Gateway
screen. You can select a WAN Interface from the drop-down list as the system default gateway.
75