Filter
Top Products
TD-8816 ADSL2+ Modem Router User Guide
21
Figure 4-9
¾ Service name: Specify a name for the PPPoA/PPPoE connection for recognition.
¾ Username: Enter your username for your PPPoA/PPPoE connection to identify and verify
your account to the ISP.
¾ Password: Enter your password for your PPPoA/PPPoE connection.
¾ Encapsulation: For both PPPoA/PPPoE connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
¾ Bridge Interface: Activate the option, the modem router can also work in Bridge mode.
¾ Connection: For PPPoA/PPPoE connection, you can select Always on or Connect
on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there
is no traffic (or Idle) for a pre-specified period of time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically
on.
¾ Default Route: You should select Yes to configure the PVC as the default gateway to
Internet from this device.
¾ Static/Dynamic IP Address: For PPPoA/PPPoE connection, you need to specify the public
IP address for this ADSL modem router. The IP address can be either dynamically (via DHCP)