TP-Link TD-8816 Modem User Manual


 
TD-8816 ADSL2+ Modem Router User Guide
5
2.2 The Back Panel
Figure 2-2
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
RESET: There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button (about 5 seconds) until all LED is lit. And then release the button and wait the modem
router to reboot to its factory default settings.
Method twoRestore the default setting from “Maintenance-SysRestart” of the modem
router's Web-based Utility.
LAN: Through the port, you can connect the modem router to your PC or the other Ethernet
network devices.
ADSL: Through the port, you can connect the modem router with the telephone.
2.3 Installation Environment
The Product should not be located where it will be exposed to moisture or excessive heat.
Place the modem router in a location where it can be connected to the various devices as
well as to a power source.
Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
The modem router can be placed on a shelf or desktop.
Generally,TD-8816 is placed on a horizontal surface. The device also can be mounted on the wall
as shown in Figure 2-4 Wall-mount Install.