Filter
Top Products
TL-PS110P Single Parallel Port Fast Ethernet Print Server
20
Figure 3-31
11. Enter the “Internet Protocol (TCP/IP) Properties” page as shown in Figure 3-32. Fill in the
following par
ameters.
¾ IP Address: Specify an IP address for your adapter. The IP address must be within the
same subnet as your Router. For example, if the LAN IP address of your Router is
192.168.1.1, the IP address should be set to 192.168.1.X (1<X<10 or 10<X255, for
192.168.1.10 has been specified for your print server). Here we take 192.168.1.101 for
example.
¾ Subnet Mask: Enter the subnet mask of your network.
¾ Default Gateway: Enter the LAN IP address of your wireless router or access point. Here
takes 192.168.1.1 for example.