Filter
Top Products
TL-PS110P Single Parallel Port Fast Ethernet Print Server
45
Figure 4-9
¾ Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related
settings automatically from your DHCP server.
¾ IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
)Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
¾ Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
¾ Default Gateway: This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of the network segment.
¾ Rendezvous Settings: Enable/Disable the Rendezvous(Bonjour) support for Apple Mac OS
X 10.2 or higher.