Filter
Top Products
10
2.1.3 Connecting to an USB HUB
a) If you have more than one USB device that you would like to share over your network, you may add
an USB HUB(4-port maximum) to the MFP and Storage Server.
b) Connect the USB cable of the USB HUB to the USB port on the MFP and Storage Server, and then
connect the USB device(s) to the USB ports on the USB HUB. Make sure the power adapter of the
USB HUB is plugged in and powered on.
c) After the USB device(s) are connected to the USB HUB, the MFP and Storage Server setup utility will
automatically display the connected USB device(s). If you do not see the USB device(s) that are
connected, press “Search” button to refresh the list.
Note:
Please refer to your printer user manual on how to setup your printer on the computer.
Note:
MFP and Storage Server can only support up to 4 USB devices through an USB HUB and certain
USB devices require a direct connection to your computer in order to function at full capacity.