Filter
Top Products
6
On
(green)
There is a 100Mbps device
connected to the corresponding
port.
100Mbps
(port-1~port-8)
Off
There is a 10Mbps device
connected to the corresponding
port, or there is no device
connected to the corresponding
port.
Note
If all PoE PDs power consumption is >= 53w, a priority* will be
arranged among the PoE ports like port-1 > port-2 > port-3 >
port-4, then the system will cut off the power of the
lowest-priority port.
3.2 Rear Panel
Figure 3-2 TL-SF1008P Switch Rear Panel
*Priority: This function will help protect the system when the system power is
overloaded. For example, Port 1, 2 and 4 is using 15.4w (maximum
power for per port is 15.4W), the system power is 46.2w in total. If
there is an additional PD inserted to Port 3 with 10w, then the system
will cut off the power of Port 4 because of the overloaded power, this
means Port 1, 2 will use 15.4w, and Port3 will use 10w ,no power
will be supplied to Port 4.