Filter
Top Products
ipv6 mld snooping querier vlan query-interval
Description
The ipv6 mld snooping querier vlan query-interval command is used to
specify the interval to send the Query Message. The default value is 25 seconds.
To restore the default value, please use no ipv6 mld snooping querier vlan
query-interval command.
Syntax
ipv6 mld snooping querier vlan vlan-id query-interval interval
no ipv6 mld snooping querier vlan vlan-id query-interval
Parameter
vlan-id ——The VLAN that enables the MLD Querier function, ranging from 1 to
4094.
interval —— Specify the interval to send the Query message in seconds,
ranging from 2 to 300.
Command Mode
Global Configuration Mode
Example
Specify the interval to send the Query Message as 10s on VLAN 2:
TL-SG2424(config)# ipv6 mld snooping querier vlan 2 query-interval 10
ipv6 mld snooping querier vlan query-source
Description
The ipv6 mld snooping querier vlan query-source command is used to
specify the source address which sends the Query message. The default value
is FE80::02FF:FFFF:FE00:0001. To restore the default value, please use no
ipv6 mld snooping querier vlan query-source command.
Syntax
ipv6 mld snooping querier vlan vlan-id query-source ipv6-addr
no ipv6 mld snooping querier vlan vlan-id query-source
Parameter
vlan-id —— IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
ipv6-addr —— Specify the IPv6 source address.
Command Mode
Global Configuration Mode
178