TP-Link TL-SG2216WEB Switch User Manual


 
35
Web Smart Gigabit Switch Family User's Guide
TL-SG2216WEB/TL-SG2224WEB
combo port, only one operation type can be active at a time, if both ports
are connected at the same time, the SFP port has the priority of being
active. The combo port uses the same conguration, for example, in TL-
SG2216WEB, if port 15 is active and the Port Status parameter is set to
“Disable”, when the SFP1 is active, its Port Status parameter will also be
“Disable”.
Port Security: "Enable" Indicates the port will not learn new MAC address
and only transmit the frames from the MAC address it has learned.”
Disable" Indicates it will learn new MAC address.
Notice:
If you haven’t set the static MAC address, you can't set all of the port
security to be enabled, which will cause to not able to manage the switch.
Flow Control: Indicates whether the ow control is enabled or disabled.
Notice:
If the port is working at half duplex, the settings of ow control are divided
into several groups (each group includes 6 ports), for example, port 1 to 6
are assigned to group 1. The ports of the same group share the same ow
control settings, so when you modify the setting of one port, those of the
other ports are changed correspondingly.
Duplex Mode: Possible eld values are Auto, 10M HD, 10M FD, 100M
HD, 100M FD and 1000M FD, "HD" stands for half-duplex and "FD"
stands for full-duplex. “Auto” means auto negotiation.