TP-Link TL-SG2216WEB Switch User Manual


 
42
Web Smart Gigabit Switch Family User's Guide
TL-SG2216WEB/TL-SG2224WEB
DHCP Client: Indicates whether the DHCP function is enabled. If DHCP
client is enabled, the switch will obtain the IP address, netmask and default
gateway from the DHCP server automatically; otherwise, these three items
should be congured manually.
IP Address: Is necessary for switch management. The configuration of
switch IP address must be compliant with the subnet layout.
Default Gateway: Serves as the default destination when a packet whose
destination IP address is not within the switch’s subnet is to be forwarded.
Notice:
1) When DHCP client is enabled, the IP parameters are obtained
automatically from the DHCP server, so the “IP Address”, “Netmask” and
“Default Gateway” elds are disabled. These parameters can be queried
on the DHCP server.
2) The initial state of the DHCP client is disabled and the initial IP address is
192.168.0.1.
5.3.3.2 Static MAC Address
This page provides the function of adding, searching a static MAC address
and changing the entry state, as shown in gure 5-24.
Figure 5-24 Static MAC address