187
periodically, based on which the management station can monitor network
effectively.
Syntax
rmon history index interface gigabitEthernet port [ interval seconds ]
[ owner owner-name ]
no rmon history index
Parameter
index —— The index number of the entry, ranging from 1 to 12, in the format of
1-3,5.
port ——The Ethernet port number.
seconds —— The interval to take samplings from the port, ranging from 10 to
3600 in seconds. By default, it is 1800.
owner-name —— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is “monitor”.
Command Mode
Global Configuration Mode
Example
Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds
for the entry 1-3:
TL-SG3424(config)# rmon history 1-3 interface gigabitEthernet 1/0/2
interval 100 owner owner1
rmon event
Description
The rmon event command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use no rmon event
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
Syntax
rmon event index [ user user-name ] [ description descript ] [ type { none | log
| notify | log-notify }] [ owner owner-name ]
no rmon event index