Filter
Top Products
19
L2 Managed Switch
Select the port to connectFigure 5-6
Configure the port selected in the step above as the following Figure 5-7 shown. 5.
Configure Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1,
Flow control as None, and then click OK.
Port SettingsFigure 5-7
Type the User name and Password in the Hyper Terminal window, the factory default 6.
value for both of them is admin. The DOS prompt” TP-LINK>” will appear after
pressing the Enter button as Figure 5-8 shown. It indicates that you can use the CLI
now.
Log in the SwitchFigure 5-8
Configuration