Filter
Top Products
20
L2 Managed Switch
Logon by Telnet
■
To log on to the switch by a Telnet connection, please take the following steps:
Make sure the switch and the PC are in the same LAN.1.
Click Start2.
→
Run to open the Run window.
Open the Run windowFigure 5-9
Type cmd in the prompt Run window as Figure 5-10 and click OK.3.
Run WindowFigure 5-10
Type telnet 192.168.0.1 in the command prompt shown as Figure 5-11, and press the 4.
Enter button.
Connecting to the SwitchFigure 5-11
Configuration