TP-Link TL-SL2452WEB Switch User Manual


 
48
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
5) --: The port is a trunk member and its binding function cannot be
congured.
Further Explanation
1) If the port is set to secure port manually in "Port Parameter " page, the
dynamic binding cannot be configured here. If the port with dynamic
binding enabled transfers into secure state automatically because the
port has bound the specied number MAC address, the dynamic binding
function of the port can be enabled or disabled again.
2) The combo box in "All Ports " entry is used to change the selections of
corresponding combo boxes of all ports simultaneously.
3) A "Refresh" button is provided to look up the latest number of bound MAC
address.
Notice:
If the switch port is a trunk member or an unplugged SFP port, the binding
function of the port cannot be congured here.
5.3.3.5 Bound MAC Address
This page is shown below:
Figure 5-32 Bound MAC Address
Index: Indicates the entry index in dynamic binding MAC address table.