Filter
Top Products
02
L2 Managed Switch
Note:
The Switch features some
“
Combo
”
ports. A
“
Combo
”
port consists of a RJ45
port and a SFP port, and the two ports share the same LED.
Port Feature
Model
10/100Mbps
RJ45 Port
10/100/1000Mbps
RJ45 Port
Console Port SFP Port
TL-SL5428E 24 4 1 2
10/100Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each
has a corresponding 10/100Mbps LED.
10/100/1000Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 1000Mbps LED.
Console Port
Designed to connect with the serial port of a computer or terminal for monitoring
and configuring the Switch.
SFP Port
Designed to install the SFP module. TL-SL5428E Switch features some SFP
transceiver slots that are shared with the associated RJ45 ports. The associated
two ports are referred as a
“
Combo
”
port, which means they cannot be used
simultaneously, otherwise only SFP port works.
Rear Panel
■
The rear panel of TL-SL5428E is shown as the following figure.
Rear Panel of TL-SL5428EFigure 1-2
Grounding Terminal
The Switch already comes with lightning protection mechanism. You can also ground
the Switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
Introduction
Grounding Terminal
Power Socket