TP-Link TL-WA5110G Network Card User Manual


 
34
Figure 4-24 DHCP Clients List
¾ Index(ID)- The index of the DHCP Client
¾ Client Name - The name of the DHCP client
¾ MAC Address - The MAC address of the DHCP client
¾ Assigned IP - The IP address that the router has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will
request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the Refresh button.
4.7.3 Address Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the
same IP address each time when it accesses the DHCP server. Reserved IP addresses should
be assigned to servers that require permanent IP settings. This page is used for address
reservation (shown in Figure 4-25).
Figure 4-25 Address Reservation
¾ MAC Address - The MAC address of the PC which you want to reserve IP address for.
¾ Reserved IP Address - The IP address of the router reserved.
¾ Status - It shows whether the entry is enabled or not.
¾ Modify – To modify or delete an existing entry.
To Reserve IP addresses:
1. Click the Add New button in the page of Address Reservation, the following page(Figure
4-26) will display.
2.
Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP
address in dotted-decimal notation of the computer you want to add.
3. Click the Save button after finish configuring.