TP-Link TL-WR841ND Network Router User Manual


 
300Mbps Wireless N Router TL-WR841N/TL-WR841ND
-39-
Figure 4-18
Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
¾ WPA /WPA2 – Enterprise - It’s based on Radius Server.
Version - you can choose the version of the WPA security on the pull-down list. The default
setting is Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2 (WPA
version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
)
Note:
If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a
notice in red as shown in Figure 4-19.
Figure 4-19
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port that radius service used.
Radius Password - Enter the password for the Radius Server.