Transcend Information TS-USP3/N Computer Hardware User Manual


 
HARDWARE INSTALLATION 13
2.4.2 Floppy Disk Drive Connector (34-pin FDC)
This connector supports the floppy disk drive ribbon cable which is one of the items in your
motherboard package. After connecting the single end to the board, connect the two plugs at the
other end to the floppy drives. Remember, as in the last section, the red stripe on the edge of the
ribbon cable must be the nearest to PIN 1 (on the left as shown below), or your connection wont
work.
Floppy Disk Drive Connector
PIN1
FDC
Floppy Disk Drive Connector
DIMM1
(
64bit 168pin SDRAM Module
)
DIMM2
(
64bit 168pin SDRAM Module
)
PCI Slot1 (PCI1)
PCI Slot2 (PCI2)
PCI Slot3 (PCI3)
CPU-FAN
WOL
FDC
IDE2
IDE1
GMCH
COMB
AC97
IntelICH
66/100MHz
Pin1
COMA
VGA
Parallel Port
Game Port
Line
_
in
MIC
Line
_
out
Li Batter
y
Transcend