Filter
Top Products
• •
• •
• Parallel Port Mode
This field allows you to set the operation mode of the parallel port.
- SPP: Allows normal-speed operation, but in one direction only.
- EPP: Allows bi-directional parallel port operation at maximum speed.
- ECP: Allows DMA and bi-directional operation. It is faster than EPP mode.
- ECP + EPP: Allows normal speed operation in two-way mode.
• •
• •
• EPP Mode Select
Select EPP port type “1.7” or “1.9”.
• •
• •
• ECP Mode Use DMA
Assign DMA channel “1” or “3” to the port for ECP mode operation.
• •
• •
• PWR-ON After PWR-Fail
Choose if you want the system to automatically Power On after the power has failed.
- Off: Disable this function
- On: Enable this function
- Former-Sts: Not only to Power On the system, but also to return it to its former status.
• •
• •
• Game Port Address
Set Joystick Game Port Address. The choices: “Disabled”, “201” , and ”290”
• •
• •
• Midi Port Address
Set Midi Port Address. The choices: “Disabled”, “330” , “300” and ”290”
• •
• •
• Midi Port IRQ
Assign IRQ 5 or 10 to the Midi Port.
BIOS SETUP 39
• •
• •
• Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer) port.
The choices: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
• •
• •
• Use IR Pins
This option selects IR transmission routing. Two choices are:
RxD2,TxD2 -> COMB Connector
IR-Rx2Tx2 -> IR Connector