Filter
Top Products
IONPS-A, AC Power Module
14
Tech Support: 1-800-260-1312 – International: 00-1-952-941-7600 – (24 hours)
Troubleshooting
If the Power Module fails, isolate and correct the failure by determining the answers to
the following questions and then taking the indicated action:
1. Is the Power LED on the IONPS-A, AC Power Module illuminated?
NO
• Is the Power Module inserted properly into the chassis?
• Is the Power Module properly connected to the external power source?
• Does the external power source provide power?
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• Proceed to step 2.
2. Is the fuse on the IONPS-A, AC Power Module intact?
NO
• CAUTION: See the “Replace the Fuse” section for the proper method
for replacing the fuse to the Power Module.
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
techsupport@transition.com – Click the “Transition Now” link for a live Web chat.
15
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada: 1-800-260-1312
International: 00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto
www.transition.com and click the Transition Now link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto
www.transition.com and click the Learning Center link.
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
techsupport@transition.com
Address
Transition Networks, 10900 Red Circle Drive, Minnetonka, MN 55343, U.S.A.
telephone: 952-941-7600; toll free: 800-526-9267; fax: 952-941-2322
Declaration of Conformity
Name of Mfg: Transition Networks
10900 Red Circle Drive, Minnetoka, MN 55343 U.S.A.
Model: IONPS-A, AC Power Module 120/240 VAC
Purpose: To declare that the IONPS-A, AC Power Module to which this declaration
refers is in compliance with the following directive(s) and standard(s):
EMC Directive 2004/108/EC; EN 55022:2006+A1:2007 Class A;
EN55024:1998+A1:2001+A2:2003; EN6100-2-3; EN6100-3-3; CFR Title 47 Part 15
Subpart B Class A. Low Voltage Directive: 2006/95/EC; EN60950-1:2006; CFR Title 21
Section 1040.10 Class I.
I, the undersigned, hereby declare that the model number(s) listed in this declaration of
conformity is in compliance with the Directive(s) and Standard(s) herein.
_January, 2010_____
Stephen Anderson, Vice-President of Engineering Date