Filter
Top Products
CPSMP-130 & CPSMP-140
10
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Technical Specification
For use with Transition Networks model CPSMP-130 or CPSMP-140 or equivalent.
Standards UL Listed; FCC & CISPR Class A; CE Mark
Dimensions 3.4" x 2.5" x 11.0" (86 mm x 64 mm x 279 mm)
Weight 1.8 lb (0.8 kg) (approximate)
CPSMP-130 Power Input: 48VDC (38 to 58VDC) @ 2.63Amp
(typical for a fully-loaded chassis)
Power Output: +12 VDC @ 12.5 Amp (maximum)
CPSMP-140 Power Input: 24VDC (20 to 31VDC) @ 4.83 Amp
(typical for a fully-loaded chassis)
Power Output: +12 VDC @ 8.3 Amp (maximum)
Fuse 6.3Amp / 250V
MTBF 520,441 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
1,087,866 hours (Bellcore7 V5.0)
Environment Tmra**: 0 to 50°C (32 to 122°F )
Storage Temp: -20 to 85°C (-4 to 185°F)
Humidity: 10 to 90%, non condensing
Altitude: 0 to 10,000 feet
Warranty Lifetime
**Manufacturer’s rated ambient temperature: Tmra range for these power supply
modules depend on the physical characteristics and the installation configuration
of the Transition Networks PointSystem™ chassis in which this slide-in-module
will be installed.
For the most up-to-date information on the CPSMP-130 and CPSMP-140 power
supply modules, view the user’s guide on-line at: www.transition.com.
11
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada: 1-800-260-1312
International: 00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto www.transition.com and click the Transition Now link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto www.transition.com and click the Learning Center link.
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
techsupport@transition.com
Address
Transition Networks, 6475 City West Parkway, Minneapolis, MN 55344, USA
telephone: 952-941-7600, toll free: 800-526-9267, fax: 952-941-2322
Troubleshooting
If the power supply module fails, isolate and correct the failure by determining
the answers to the following questions and then taking the indicated action:
1. Is the power LED on the power supply module illuminated?
NO
• Is the power supply module inserted properly into the chassis?
• Is the power supply module properly connected to the external
power source?
• Does the external power source provide power?
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Proceed to step 2.
2. Is the fuse on the power supply intact?
NO
• CAUTION: See the “Replacing the Fuse” section (page 8) in this
user’s guide for the proper method for replacing the fuse to the
power supply module.
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.