Filter
Top Products
Transition Networks Section Vll: FBRM/BFFG Operation
OAM Device management configuration options
OAM mgmt.
configuration
options
OAM Mode control is a feature of the FBRM/BFFG Devices. It can be set to ‘Auto’
(default) or set manually (Active/Passive/Disabled):
• In ‘Auto’ Mode, the Device decides the OAM operation
• In Manual Mode, the user decides the OAM Mode (Active/Passive/Disabled)
Table 13 lists the default configuration.
Table 13: OAM Device Configurations
Chassis Device Standalone OAM Capability
Active Passive The active Device manages the passive Device.
Active Active The Devices exchange status information through
OAM, but cannot be managed through OAM.
Passive Active The chassis Device needs to be in Active Mode since
it is being managed by the point system agent.
Management through ‘OAM and the chassis
simultaneously will cause configuration errors.
Note: A chassis Device in a single slot chassis without the Point System agent
functions as a standalone Device.
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 75