Filter
Top Products
Transition Networks Section Vll: FBRM/BFFG Operation
Firmware upgrades, continued
XModem method (continued)
Step Action
3. Type “Y” at the prompt.
4. Press the ENTER key to launch the firmware upgrade screen, shown in
Figure 63.
Figure 63: Firmware Upgrade via Xmodem
5. Choose the ‘send file’ option from Hyperterminal with ‘XModem’ as the
protocol. After the download, the bootloader verifies the CRC of the file
and resets itself to start the user application.
Continued on next page
10/100BaseT to 100BaseFX IPBased 802.3ah Bridge
Version A
Copyright (c) 2006 Transition Networks
Reading config from flash........done
Erasing Application Memory
Start sending file through XModem...
Transfer completed
Checking CRC. . . . . . . .
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 77