TRENDnet 1-Port Wireless N Multi-Function USB Print Server Printer Accessories User Manual


 
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-MFP1
3
Side View (Left)
Power Port Connect the included power adapter from your router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
On/Off Power Switch Move the On/Off switch to power “On” (Left position)
or “Off” (Outer position) the device.
WPS/Reset Button Push and hold this button for 5 seconds to activate Wi-Fi
Protected Setup (WPS) Push Button Configuration (PBC) setup. Push and hold
for 15 seconds to reset the device to its factory default setting.
Antenna Fixed 2dBi antenna.
Application Diagram
The print server allows you to share your regular printer or multi-function printer
through a network. It is typically placed in the same location of your printer or multi-
function printer. Unlike many print servers the TEW-MFP1 has the ability to
communicate to your wireless network at data rates at Wireless N speeds eliminating
any wires throughout your household or office. In addition to its print server
functionality the TEW-MFP1 can also allows you to share USB storage devices over the
network.