Filter
Top Products
User Manual
TEW-455APBO High Power Wireless Outdoor PoE Access Point
8
1.5 Specification
Wireless Architecture Mode
AP Mode
Pure AP Mode
It can be deployed as a tradition fixed wireless Access Point
It allow wireless clients or Stations(STA) to access
AP/WDS Mode
This enables the wireless interconnection of Access Point in an IEEE802.11 network .and
accept wireless clients at the same time
WDS Mode
This enables the wireless interconnection of Access Point in an IEEE802.11 network.
It allows a wireless network to be expanded using multiple access point without the need for a
wired backbone to link them.
It can’t allow wireless clients or Stations (STA) to associate.
CPE Mode
Wi-Fi connection as WAN , in CPE mode , the device run as DHCP server to assign IP address to
clients out of a private IP address pool behind a NAT
Networking
Support Static IP, Dynamic IP(DHCP Client) and PPPoE on Wi-Fi WAN Connection
Support PPTP/L2TP/IP Sec Pass Through
PPPoE Reconnect – Always On , On demand, Manual
MAC Cloning
DHCP Server
802.3 Bridging
Masquerading (NAT)
Proxy DNS
Dynamic DNS
NTP Client
Virtual DMZ