TRENDnet TEW640MB Network Hardware User Manual


 
1. I typed http://tew-640mb.trendnet in my Internet Browser's Address Bar, but an error
message says “The page cannot be displayed.” How can I get into the TEW-640MB's web
configuration page?
1. Check your hardware settings again by following the instructions in section 2.
2. Make sure the Network Port and Wireless lights are lit.
3. Enter http://192.168.10.110 into the browser instead. This is the default IP address of the
TEW-640MB. Make sure your network adapter’s TCP/IP settings are set to Obtain an IP
address automatically (see the steps below).
4. Reset the TEW-640MB. Take a pin or paperclip and press the RESET button for 15
seconds, then let go. Wait 30 seconds, then type http://tew-640mb.trendnet or
http://192.168.10.110 into your browser.
Troubleshooting
Windows 7
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Change
Adapter Settings and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on
Obtain an IP address automatically.
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Manage
Network Connections and then right-click the Local
Area Connection icon and then click Properties.
Windows Vista
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Obtain
an IP address automatically.
9