Filter
Top Products
36
Enable Port Forwarding: Enable or disable Port Forwarding.
Description: The description of this setting.
Local IP / Local Port: This is the LAN Client/Host IP address and Port number that the
Public Port number packet will be sent to.
Type: Select the port number protocol type (TCP, UDP or both). If you are unsure, then
leave it to the default “both” setting. Public Port enters the service (service/Internet
application) port number from the Internet that will be re-directed to the above Private
IP address host in your LAN Network.
Public Port: Port number will be changed to Local Port when the packet enters your LAN
Network.
Add Port Forwarding
Fill in the "Description" , "Local IP", "Local Port", "Type" and “Public Port” of the
setting to be added and then click Add button. Then this Virtual Server setting will be
added into the "Current Port Forwarding Table" below. If you find any typo before
adding it and want to retype again, just click Clear and the fields will be cleared.
Remove Port Forwarding
If you want to remove Port Forwarding settings from the "Current Port Forwarding
Table", select the Port Forwarding settings you want to remove in the table and then
click "Delete Selected". If you want to remove all Port Forwarding settings from the
table, just click the Delete All button. Click Reset will clear your current selections.
Click Apply at the bottom of the screen to save the above configurations.