TRENDnet TPL406E2K Network Hardware User Manual


 
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-406E / TPL-406E2K
21
Technical Specifications
Hardware
Standards IEEE 1901, HomePlug® AV, IEEE 802.3, IEEE 802.3x, IEEE
802.3u
Interface
1 x 10/100Mbps Auto-MDIX RJ-45 port
Power prong
o A: North America Type B (NEMA 515)
o EU: Euro Type C (CEE 7/16)
o UK : United Kingdom Type G (BS 1363)
Frequency Band 2 ~ 68 MHz
Modulation OFDM Symbol Modulation on link synchronization,
1024/256/64/8 - QAM, QPSK, BPSK, ROBO Carrier
Protocol TDMA, and CSMA/CA
Speed Powerline: up to 500Mbps**
Ethernet: Up to 200Mbps (Full Duplex mode)
Utility OS Compatibility Windows 7 (32/64-bit), Vista (32/64-bit), XP(32/64-bit)
Nodes
Up to 8 (max.)
Overlapping
Powerline Networks
Up to 4 (per electrical system)
Coverage Up to 300m (984ft.)
Security 128-Bit AES (Advanced Encryption Standard)
LED Power (PWR)
Powerline (PL) with Connection Quality Indication
Best (Green)
Better (Amber)
Good (Red)
No connection (Off)
Ethernet Connection
Solid
Blinking
Off
Buttons
Sync (3 sec.)/Reset (20 sec.)
Dimension (L x W X H) A: 70 x 50 x 43 mm (2.76 x 1.97 x 1.69 in.) per unit
EU: 70 x 50 x 63 mm (2.76 x 1.97 x 2.48 in.) per unit
UK: 70 x 50 x 58 mm (2.76 x 1.97 x 2.28 in.) per unit
Weight A: 51 g (1.8 oz) per unit
EU: 56.7 g(2.0 oz) per unit
UK: 68 g (2.4 oz) per unit
Power Source 100~240V AC, 50~60Hz
Consumption Active mode: 2.2 Watts (max.)
Standby mode: 0.5 Watts (max.)
Temperature Operating: 0° ~ 40°C (32° ~ 104°F)
Storage: -10° ~ 55°C (14° ~ 131°F)
Humidity Max. 95% (non-condensing)
Certifications CE, FCC
* Maximum of 8 adapters (nodes) recommended for streaming video across your network.
** 500Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary
depending on environment.
*** Networked Powerline devices need to be plugged into power outlets that are on the same
electrical system.
**** GFCI outlets and AFCI circuit breakers may degrade Powerline network signals.