- 41 -
available wireless AP within the network, click the Site Survey
button.
- Wireless Channel: Select the channel from the pull-down menu.
The default setting is 11.
- Transmission Rate: Select the data transmit rate from the pull-
down menu. The default setting is Fully Automatic.
WEP Encryption
This field allows you to configure the settings of data encryption.
Please remember that the WEP key must be set before the data
encryption is enforced.
- WEP Encryption: This option allows you to select Disable, 64
bits, and 128 bits for the encryption setting.
- WEP Key Format: You can decide the network key to be
encoded by ASCII (ASCII characters) or HEX (hexadecimal
digitals).
Then, enter the key(s) for the network in the Key box (1~4).
Advanced Setting
This field allows you to configure more settings, including:
- Beacon Interval: Enter the number of beacon interval time in
millisecond.
- Preamble: This option allows you to set the length of preamble.
Setting options are: Long - it is set to 144 bits; Short - it is set to
72 bits.
- Authentication Type: You can set the authentication type by
selecting the settings: Open System, Shared Key, and Both.
- 42 -
TIP: Once you have changed the settings in each option, click Save
to store the settings, or Cancel to abandon.
Configuration
J
Network
TCP/IP
This field contains three options that allow you to configure the
TCP/IP setting: IP Address, UPnP, and MAC Rendezvous.
- IP Address: This option allows you to set the IP address
manually or automatically. When you choose Manually Assign,