- 43 -
you should enter the related information in the following boxes,
including IP Address, Subnet Mask, and Default Gateway.
- DNS Server Address: DNS (Domain Name System) server is an
Internet service that translates domain names into IP addresses.
Enter at least one DNS IP Address in this field.
- UPnP: This option allows you to enable or disable UPnP mode.
- MAC Rendezvous: This option allows you to enable or disable
MAC Rendezvous mode.
- Second HTTP Port: The default port for communication is via
port 80, and you can change it according to your network
configuration. Select Enable from the option and enter the
desired port number in the following box.
Microsoft Network
Enter the name of the Workgroup that you want the print server
associated with in this field.
AppleTalk
Enter the AppleTalk Zone name in the box. In the following options,
enter the related configuration, such as the printer type.
- LPT
• Chooser Name: Display the print server’s Port name.
• Printer Type: Enter the printer’s type in this box.
• PostScript Level: Select from the pull-down menu (Level 1
or Level 2).
• Font Group: Select from the pull-down menu.
TIP: Once you have changed the settings in each option, click Save
to store the settings, or Cancel to abandon.
- 44 -
Configuration
J
User
Printing Control
By configuring the Enable User Printing Control option (Yes or
No), the user in the User List is permitted to access the print server or
not. For the user(s) who is not in the User List, you can also limit
the access right by setting the Allow Undefined Users Printing
option to Yes or No.
Define Users
You can add/delete the user(s) to/from the User List. The User List
at the bottom of the screen displays the current defined user and
related information for the print server.
TIP: Once you have changed the settings in each option, click Save
to store the settings, or Cancel to abandon.