Filter
Top Products
4
Connection
Plug your UPS into an
electrical outlet.
Your UPS requires connection to a 15-amp dedicated
circuit. Once your UPS is plugged in, the UPS will
enter STANDBY mode. The fan will activate and the
“”(POWER) LED will begin flashing. The outlets
will not be active until the UPS is turned ON.
Plug your equipment into
your UPS.
Your UPS is designed to support only computer
equipment. You will overload your UPS if you connect
household appliances, laser printers or surge suppressors
to the UPS’s Outlets.
Turn your UPS ON
• Press the “ ” (POWER) button
• Hold the button for a moment, until you hear a beep.
The “ ” (POWER) LED will stop flashing and
be on constantly
• Release the button
Your UPS is now ON and its AC outlets are active.
1
1
2
3
2
3
200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 4