Filter
Top Products
9
Symptom
Erratic Behavior
Pressing the Hot Keys does not
get a response
Troubleshooting
Possible Cause
Unit not receiving power under self-
powered operation
The connection from the selected
port to the target PC has been
broken, or the PC is turned OFF.
Improper KVM switch reset
Incorrect keying in the Port ID.
Action
Use the power adapter that was
provided with the units to provide
external power.
Check the Online LED for the
selected port. If it is not lit:
1. Manually press one of the
Select switches to connect to
a PC that is powered ON.
2. Check the cables to make
sure all are properly connected.
3. If the desired PC is OFF,
power it ON
Turn OFF KVM Switch and wait 5
seconds before turning it back ON.
This unit cannot be cascaded.
Note: If the unit is operating in the
Selfpowered mode (without the
optional Power Adapter), you must
unplug the power cord of any con-
nected PC that has the Keyboard
'Power On' function, otherwise the
switch still draws power from the
PC.
After invoking the hotkey function,
be sure to key in the Port ID and
press [Enter] within 1 second for
each key.
200508040 93-2465 B004-008 OM.qxd 8/10/2005 2:58 PM Page 9