Filter
Top Products
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands.
Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over
IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Emergency Power Off (EPO) interface with cable
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot
of connected devices
Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard
power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
3000
Output kVA capacity (kVA) 3
Output Watt Capacity
(watts)
2250
Output kW capacity 2.2
Output power factor 0.8
Nominal Output Voltage(s)
Supported
230V
Nominal Voltage details 230v nominal inverter output voltage
Frequency compatibility 50 / 60 Hz
Output voltage regulation
(line mode)
230V (-15%, +6% )
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
8 C13 outlet(s); 1 C19 outlet(s)
Included output power
cables
Includes 3 C13 to C14 output power cables
Built-in controllable
switched load banks
Three switchable two-outlet C13 load banks
Output circuit breaker 10A (x2) - each breaker protects 4 C13 outlets, C19 outlet does not include a breaker
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT