Filter
Top Products
ML390/391 Turbo Printer Handbook 17
11.Baseline for top of Form(TOF) on pa-
per is indicated by red line on clear plas-
tic paper shield.
12.If desired, change TOF setting using
control panel:
If form tear off is being selected in the
printer menu, press the TEAR button
to bring the paper down to the print
position. Hold down the SHIFT button
and release the TEAR button.
☛ to set TOF further down on page,
hold SHIFT button while pressing FF/
LOAD button: this will advance paper
up in micro increments
☛ to move TOF further up on page,
hold SHIFT button while pressing LF
button: this will advance paper down
in micro increments
Baseline
1
2
3
4
5
EXIT
POWER
SEL
SEL
ALARM
FF/LOAD
LF
Micro Feed
Down
Micro Feed
Up
GROUP ITEM
MENU
SHIFT
Hold
Press to feed
paper down in
micro increments
Press to feed
paper up in micro
increments
ALARM
FF/LOAD
SET
TEAR
LF
MENU
Micro Feed
Down
Micro Feed
Up
GROUP ITEM
SHIFT
Press to hold the
paper before
releasing the TEAR
button.
Press to bring
the paper down
to the print
position.