7
http://www.TYAN.com
1.3 Specifications
NOTE: Specifications are subject to change without notice.
Processor
• Single socket 478
• Intel
Pentium 4 processor up to 3.06 GHz
• Supports 400/533 MHz FSB
Chipset
• Intel 845E MCH
• MCH + ICH-4
• NS PC87366 Super I/O chip
Memory
• Dual channel memory bus
• Two 184-pin DDR DIMM slots
• DDR 200/266 support
• Up to 2 GB of unbuffered DDR
• Supports non-ECC/ECC type memory
modules
Expansion Slot
• 32-bit/33MHz PCI v2.2 slot
Integrated PCI Graphics
• ATI Rage
TM
XL PCI graphics controller
• 8 MB frame buffer of video memory
External I/O Ports (Rear)
• One 9-pin UART serial port
• One VGA port
• Two RJ -45 LAN connectors
• Two USB 2.0 ports
Front Panel Features
• LED Indicators
– Power
– LAN 1 and LAN 2 Link/Activity
– HDD
• LCD interface
– 2 x 16 digits
– Connected via COM2
– Four direction buttons plus one “Select”
and one “Cancel” button
Networking
• Two 10/100Base-TX Ethernet LAN ports
(Intel 82551QM controller)
• Supports TCP, UDP, IPv4 Checksum
off-load
Storage Interface
• Integrated two master IDE RAID controller
(Promise PDC20276)
• Supports RAID level 0, 1
Storage Capacity
• Up to two IDE drives
Integrated Hardware Monitoring
• Integrated in Super I/O
• CPU temperature and voltage monitoring
• CPU and system fan speed monitoring
and control
• 3 x 3-Pin header for system fans
BIOS
• Phoenix BIOS on 4 MB Flash (FWH)
• ACP I 1.0b / APM 1.2
• Detect function of H/W monitoring
• Auto configuration of IDE hard disk types
• Quick boot and multiple boot options
• LAN remote boot (PXE) support
• Power Management: S1 and S5-type
Environment
• Operating temperature:
0 ? (32 ? ) to 40 ? (104 ? )
• Operating humidity:
0 % to 80 % non-condensing
Cabinet Form Factor
• Sub-1U rack-mountable chassis
• Dimension:
W16.7 x D15.3 x H1.7 inch
W424 x D387.7 x H43.5mm
• Weight: 7 kg
Power Supply
• ATX12V 250W with PFC
Accessory
• One 32-bit single PCI riser card
Regulatory
• FCC Class A (Declaration of Conformity)
• CE (Declaration of Conformity)