Filter
Top Products
Elo TouchSystems 15A2 User Guide 24
Testing the Cash Drawer Port
To test the cash drawer port, first ensure that a cash drawer port is attached to the
touchcomputer using a cable with the correct wiring definition. For additional
information, see Cash Drawer Port Signal Definition and Control section on page
44.
Note: The test program for the cash drawer port can only be performed in a DOS only
environment.
1. At the DOS command prompt, type C:\EloTouchSystems\SetupFiles\CashDrawer\
Cash Drawer Test.exe and press ENTER to start the application.
2. Press SPACE BAR to open the cash drawer. The application will display the current
status of the cash drawer.
Testing the Modem Card(optional)
To test the modem daughter card, first ensure that the BIOS settings have been set to
the MODEM setting per the installation procedure. Also, ensure that the drivers for
the card have been installed on the touchcomputer and a live telephone line is con-
nected to the RJ11 port.
1. From the windows desktop, go to Start->All Programs->Accessories->
Communications->Hyperterminal.
a. If you have not previously configured your computer, fill out the in
formation requested in the window titled ¡§Location Information¡¨
and click OK.
b. In the window titled ¡§Phone and Modem Options¡¨, ensure that the
proper location is selected and click OK.
2. In the window titled ¡§Connection Description¡¨as shown below, enter a name
and click OK.