Filter
Top Products
www.ultramagicard.com
AVALON and AVALON DUO Printer USER MANUAL
Page 21 of 31
The Save & Restore Tab is used to save your driver settings to a file, restore the settings from a file, or restore the settings to
the original defaults.
If you change your driver settings it is recommended that you save these settings to a file, doing so will allow you to:
• Backup and restore your driver settings
- In case your driver is updated
- In case your driver settings are changed
- In case your driver is re-installed
• Migrating your driver settings to other PC systems
• Create driver settings profiles for your card designs
The Save & Restore Settings
:
Restore Settings from File:
This button is used to load ‘Settings Files’ (files with an .MDS
extension). These contain driver settings that have been saved using
the Save Settings to File button.
Save Settings to File:
This button is used to save the driver settings to a file with an .MDS
extension. This allows for the backup of driver settings in case the
driver is uninstalled or updated, and has a variety of other possible
advantages such as sharing driver settings between computers
and creating driver profiles for different card designs.
Restore Defaults:
Restore Factory Defaults:
This button is used to reset all the settings in the driver to their
original default settings. Be sure to back up your driver settings if you
want to keep a record of them, this can be done by using the Save
Settings to File button.
Note - The driver will ask for confirmation before going ahead with the
restore.
The Save & Restore Tab: