Filter
Top Products
42
Special Features
The preset frequency ranges are:
Chain Search Mode
Press Func + Src to start chain search mode. SRCH,
the enabled search bank number, and
or
(indicating the search direction) appear. The search
bank number being searched flashes.
Press 0-9 to enable or disable the search bank
number being searched in this mode. Enabled bank
numbers appear. (Disabled bank numbers
disappear).
At least one search bank must be enabled. (The
scanner sounds an error tone if you try to disable all
the search banks). The search bank and the
frequency where chain search starts depends on
how the scanner was set before you selected chain
search mode.
Chain Search Hold Mode
Bank
No.
Frequency (MHz) Step
(kHz)
1 25.0000-27.9950
5
2
28.0000-29.6950 5
3
29.7000-49.9950 5
4
50.0000-54.0000 5
5
137.0000-143.9950 5
6
144.0000-147.9950 5
7
406.0000-419.99375 6.25
8
420.0000-449.99375 6.25
9
450.0000-469.99375 6.25
10
806.0000-956.0000 12.5