Filter
Top Products
[ 13 ]
Submenu name Description
Auto Talk Allows you to answer the phone without pressing or .
When the AutoTalk is set to On, simply remove the handset from the cradle
and the phone automatically answers the call (see page 17).
Anykey Answer Allows you to answer the phone without pressing or .
When the Anykey Answer is On, you can answer a call by pressing any number
key, , or on the handset (see page 18).
Banner Customize the name of your handset, and display it in the LCD in the standby
mode. For example, you can name the handset “John” (see page 18).
Contrast Adjust the handset LCD brightness for better viewing (10 levels) (see page 18).
Answering Setup
This menu allows you to set up Answering Machine settings from your handset. You can
also set these setup menus from the base (see page 44).
Submenu name Description
Security Code Select a two-digit Personal Identification Number (PIN) code. A PIN code is
required to play your messages from a remote location, you will need to enter
a two-digit PIN code (see page 19).
Ring Time Allows you to set the number of rings the caller hears before your answering
system plays the outgoing message. You can set the ring time to answer after
4, 6, or 9 rings. Setting “TS” (Toll Saver), the answering system picks up
after 6 rings if you have new messages, and after 9 rings if there are none
(see page 19).
Record Time Set the duration for recording the incoming messages. You have three record
time options. The options “1 minute” or “4 minutes” set the duration for
recording the incoming messages. “Announce only” answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving
a message (see page 19)
Message Alert Lets you know when you have a new incoming message by sounding a short
alert tone (see page 20).
Call Screen Set the call screening feature to On or Off (see page 20).
Answer Mode Set your answering system to On or Off (see page 20).
UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Page 13