Filter
Top Products
[ 45 ]
Setting the Time
Follow these steps to set the clock on the answering system to the correct time.
1) Press .
2) Press /SELECT or /SELECT until the correct day is announced and the
corresponding number (from “” Sunday to “” Saturday) appears.
3) Press to select the day.
4) Press /SELECT or /SELECT until you hear the correct hour setting.
The numbers “” through “” appear on the base as each hour is announced.
5) Press to select the hour.
6) Press /SELECT or /SELECT until you hear the correct minute setting.
The numbers “” through “” appears on the base as each minute is announced.
7) Press to select the minute.
8) Press /SELECT or /SELECT until you hear the correct AM or PM setting.
The message counter displays “” or “”.
9) Press to select the AM/PM setting.
A confirmation tone sounds, the day and time you set are announced for your review.
Setting a PIN code
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code ( - ). To select a PIN code, perform
the following steps:
1) Press twice. The current PIN code appears on the base
and it is announced.
2) Press /SELECT or /SELECT until the desired number appears. Press and hold
/SELECT or /SELECT to quickly scroll through the numbers on the display.
3) Press to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
• Normally, if the
system remains idle
for 10 seconds after
/SELECT or
/SELECT is
pressed, the system
will return to
standby. However, for
setting the time, the
idle time is extended
to 2 minutes.
• Press and hold
/SELECT or
/SELECT to
quickly scroll through
the numbers on
the display.
• Time stamp will not
be heard until you
have set the time.
UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Page 45