Filter
Top Products
3.
In SCAN or SEARCH Mode, press to stop
scanning. (
HOLD
appears on the display.)
In Manual mode, press to step up the
channel.
4. NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with . During SCAN Mode, use these
keys to select or deselect any of the 10 memory
banks. (Only the selected bank indicator(s) appear
on the display.)
Note:
You cannot deactivate all 10 banks at the
same time.
Key Bank Channel
1 1-10
2 11-20
3 21-30
4 31-40
5 41-50
6 51-60
7 61-70
8 71-80
9 81-90
10 91 - 100
5. Press /
BAND
to start Limit search.
Press and hold /
BAND
to select the band for
band search. Then press /
BAND
again to start
band search.
6. Press to stop Band serch, Limit search and WX
scan. Also, press it to move to next higher channel or
frequency. Press and hold to change the
search direction to upper side.
7. In Limit search, input the frequency and press
to program the lower/higher frequency. Press
to stop Band search, Limit search, and WX scan.
Also, press it to move to next lower channel or
frequency. Press and hold to change the
search direction to lower side.
8