Filter
Top Products
Note:
If the frequency of the channel has not been
programmed, you cannot program the Alpha Name on
the channel.
4. To select the edit position, press to move the Edit
cursor to the right or to move it to the left.
5. Select the character using VFO Control. Turn clockwise
tomove0-9,A-zandother characters and stop the
control at the letter you wish to store.
6. Repeat the steps 4 and 5 for all the characters you want
to program.
7. When you complete the input, press . The words
you have programmed flash twice.
Alert Beep Setting
When a transmission occurs on a channel on which you
have set the Alert Beep function, 2 beeps will let you know
that your “favorite” channel has been received.
You can set this function for each channel. Select a
channel, then press and hold /
ALERT
to set this
function on a channel in Manual mode.
appears on the display. (Except Alpha Name display)
You cannot set this function for the channels which have
not programmed before.
17