Uniden SC200 Scanner User Manual


 
ATT Appears when the Attenuator
function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
CTCSS Appears when the Subaudible Tone
function is turned on and a CTCSS
tone is associated on the display
channel.
CDCSS Appears when the Subaudible Tone
function is turned on and a CDCSS
tone is associated on the display
channel.
2. Press to start scanning all programmed
channels that are not locked out. (
SCAN
moves
across the display during scanning.)
3. In SCAN and WX or SEARCH Mode, press to
stop scanning. (
HOLD
appears on the display.)
In Manual mode, press to step up the
channel.
4. NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with . During SCAN Mode, use these
keys to select or deselect any of the 10 memory
banks. (Only the selected bank indicator(s) appear
on the display.)
Note:
You cannot deactivate all 10 banks at the
same time.
Key Bank Channel
11-20
221-40
341-60
461-80
5 81 - 100
6 101 - 120
7 121 - 140
8 141 - 160
9 161 - 180
10 181 - 200
12