Uniden SC200 Scanner User Manual


 
Scanner to External Modem
Plug the scanner end of the supplied remote interface cable
into the remote port on the right side of your scanner. When
connecting the cable to your scanner, make sure the label
side of the cable is facing forward. Plug the other end of the
cable (DB-9 serial connector) into the external modem. You
may need a DB-9 to DB-25 null modem adapter, available at
most computer stores. Of course, make sure your external
modem is turned on. Make sure that you have a phone line
plugged into the modem jack on the back.
Scanner to Scanner
Plug the scanner end of the supplied remote interface
cables into the remote ports on the right sides of each of
the two scanners. When connecting the cable to your
scanner, make sure the label side of the cable is facing
forward.
SmartScan Mode
You can automatically download frequencies, from the
Uniden National Frequency Database server. After
connecting the scanner to a modem using the Scanner to
PC or Scanner to External Modem steps (see page 38),
turn the radio off. Press and hold
REM
key and turn the
radio on.
1. The following screen appears. (SmartScan Mode) To
select SmartScan mode, press or .
39