Filter
Top Products
2. Use the and keys or VFO control until you
see the Band you want.
3. Wait for at least 2 seconds or press /
BAND
for
Search to begin. If you wish to change the search
direction, press and hold or to search in an
up or down direction.
4. When Search stops on a desired frequency, press
or to stay on that frequency.
5. To store the displayed frequency into a channel:
Select the channel number with the numeric keys, and
press . The selected channel will appear on the
display. The frequency currently stored in the channel
will appear for 2 seconds and then will be replaced by
the frequency located from the search.
6. To store the displayed frequency into that channel,
press . The frequency will blink twice to confirm the
programming. The next available empty channel to
store the frequency will be blinking on the display.
Programming Channels with Alpha Characters
Use this feature to name channels (up to 200 channels) for
easy reference.
1. Select the channel.
2. Press /
ALERT
to go to the Alpha Name display,
“ ” appears on the display.
3. Press . The Edit cursor flashes.
Note:
If the frequency of the channel has not been
programmed, you cannot program the Alpha Name on
the channel.
4. To select the edit position, press to move the Edit
cursor to the right or to move it to the left.
21