Filter
Top Products
26
Operation
3. Press PWR or wait for 2 seconds to return to the
mode you were in.
You can search for Air, FM Radio and VHF High
band without knowing the specific frequencies used
in your area. Press or to change the search
direction.
When the scanner stops on a transmission, press
RSM/HOLD to stop searching and listen to the
transmission. HOLD appears. In this mode, you can
press or to increment or decrement the
frequency by 1 step. Press and hold or to
increment or decrement frequency continuously.
To release the hold and continue searching, press
RSM/HOLD.
Registering the Search Frequency
In Channel Memory
You can store frequencies you found during
Frequency Search Mode or Frequency Hold Mode
into channels.
1. Press FNC + MW. A blank channel and the
frequency you found are displayed alternately.
2. Repeatedly press or to select the channel
where you wants to register.
3. Press FNC + MW to complete the registration.
Registered channel frequency is distributed to
each bank according to the a frequency band.
If you entered a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated.
If you entered the frequency by mistake, press PWR
then enter the correct frequency. To enter the
frequency anyway, press FNC + MW to accept.
UB333 Paper OM reduced size.fm Page 26 Friday, June 3, 2005 1:43 PM